Qlogic Qla2340 Drivers For Mac

• Qlogic Qla2340 Drivers For Mac Free
• Qlogic Drivers Download

Next, select the driver from the list to download or view the details of that particular driver. This manufacturer makes BIOS / Motherboard, CD / DVD, Digital Camera, Graphics / Video Adapter, Hard Disk Controller, Network Devices, Other Devices, Printer / Plotter / Multi-Office.

DriverGuide maintains the most extensive database of Other drivers on the web. Use the list below to find the correct Qlogic Other driver.Next, select the driver from the list to download or view the details of that particular driver. No rights or licenses in the Software are granted to Licensee other than those rights expressly granted in this Agreement. Nothing in this License entitles.

I'm currently trying to set up a small storage system as a fibre channel target. This is for testing, so I'm currently using Solaris (Nexenta) and a QLogic QLA2340 HBA. For some reason, the qlc and qlt drivers don't support the QLA2340, so I'm using the qla2300 driver from QLogic's website. I've also got the scli utility installed for configuration.

The HBA is detected by the system. That said, it's not clear how I get from this point to a point where I have a ZFS volume being exposed as an FC target. I was originally following this guide but it seems that without the qlc/qlt drivers, Sun's configuration tools won't work. Does that also imply that COMSTAR also won't work?

What's the best way to expose an FC target with this setup? Most of the options I'm seeing in scli complain that the port state is LinkDown (it is, I've not plugged anything in yet). Do I have to have my FC client plugged up and working before I can configure the target?

Apologies for the slight vagueness of the question, but I'm not overly familiar with the terminology. Right, as per the previous comment, I figured it out, so thought I should answer this.

Short answer: you can't. The Solaris qla/qlc drivers do not support the QLogic 2GBit fibre cards. They just plain won't see them in any capacity, initiator or target. The only way to get the OS to be able to use the cards is to grab QLogic's qla2300 driver on their site.

Qlogic Qla2340 Drivers For Mac Free

From the Readme: Hard-coded NVRAM values The following firmware option values are hard-coded in the driver: 1. Enabled Node Name option. Enabled Full Login after LIP.

Qlogic Drivers Download

Disabled Stop PortQ on Full Status. Enabled PDBC notify. Enabled Target Inquiry Data for disabled LUNs. Enabled ADISC. Disabled Disable Initiator Mode.

Disabled Enable Target Mode. Enabled Fairness in loop arbitration.

So it won't work. Because they disabled it in the driver.